Project description
We are opening a small shop in a converted street-level room and we need a trading counter with a display case made and installed before the opening day. The room is narrow, so the counter should run about 2.4 m along the left wall and stand 1.05 m high, with a working top around 60 cm deep so the seller has room for a scale, a bag stand and the card terminal. The customer side is the face of the shop: a glazed display of tempered glass no thinner than 6 mm, with polished and eased edges everywhere a hand or a child can reach, and two glass shelves inside so small items sit at eye level instead of down at the floor line.
Lighting matters to us more than decoration. What we sell looks grey and cheap under cold light, so we want warm-neutral LED lines with honest colour rendering, hidden behind the front rail, one line per shelf, and the driver placed where a fitter can reach it later without taking the case apart. The body should be wood or a wood-faced board in a warm oak tone, because the floor and the wall shelving are already in that colour and we do not want the counter to look like a separate piece of furniture brought in from another shop.
From the seller's side we need storage that locks: two closed sections with a simple keyed lock, one open shelf for packaging, and a proper place for the till. That means a flat niche about 45 by 40 cm, a cable channel to the socket behind, and a grommet hole so the terminal cable does not lie across the top. Please account for weight and for getting it inside: the doorway is 78 cm wide and the corridor turns, so the piece has to arrive in sections and be assembled and levelled in place on an uneven floor.
— measurement on site before anything is cut
— a finish sample shown to us before the body is veneered or painted
— safe glass edges, neat silicone joints, no sharp corners at child height
— delivery in sections through a narrow door, assembly and levelling on site
— everything finished and cleaned up three days before we open
Lighting matters to us more than decoration. What we sell looks grey and cheap under cold light, so we want warm-neutral LED lines with honest colour rendering, hidden behind the front rail, one line per shelf, and the driver placed where a fitter can reach it later without taking the case apart. The body should be wood or a wood-faced board in a warm oak tone, because the floor and the wall shelving are already in that colour and we do not want the counter to look like a separate piece of furniture brought in from another shop.
From the seller's side we need storage that locks: two closed sections with a simple keyed lock, one open shelf for packaging, and a proper place for the till. That means a flat niche about 45 by 40 cm, a cable channel to the socket behind, and a grommet hole so the terminal cable does not lie across the top. Please account for weight and for getting it inside: the doorway is 78 cm wide and the corridor turns, so the piece has to arrive in sections and be assembled and levelled in place on an uneven floor.
— measurement on site before anything is cut
— a finish sample shown to us before the body is veneered or painted
— safe glass edges, neat silicone joints, no sharp corners at child height
— delivery in sections through a narrow door, assembly and levelling on site
— everything finished and cleaned up three days before we open
Other / Miscellaneous Cash, Bank transfer
