Backyard Outdoor Shower and Poolside Changing Cabana
108 views 0 responses#43932
Budget€1,700for the project
FormatOne-time projectno prepayment
PaymentCash, Bank transfer
Responses acceptedResponse period is overuntil 25.09.2026
Responses0category average: 1.3
Views1087 in 14 days
Project description
I need a small poolside amenity built in my backyard: a standalone outdoor shower stall paired with a compact changing/storage cabana right next to it, sharing one footing pad so the plumbing run stays short. The shower needs a hookup to the existing hose bib line near the pool equipment pad — I'd like a proper backflow-safe tee into that cold line, plus a small tankless or tempering setup if it's not too far outside budget, so it isn't ice cold on cool mornings. Drainage matters most to me: no puddling near the pool deck, so I'm thinking a gravel-filled dry well fed by a shower pan with a floor drain, sloped correctly so water never sheets back toward the pool coping.
The cabana itself should be simple cedar post-and-beam framing, roughly 5x6 feet, tall enough to change clothes standing up, with a bench built into one wall and a slatted shelf above it for folded towels and a couple of bins. Privacy screening on the shower side is important — vertical slat fencing or louvered panels rather than solid walls, so airflow keeps it from feeling stuffy in summer. A simple shed roof with asphalt shingles or standing-seam metal to match the house trim would be great; a door with a hook-and-eye latch is fine, no fancy hardware needed.
Timeline is flexible but I'd like the footing poured and framing up within the first week, plumbing and drainage tied in during the second, and roofing plus trim finished by the third. Please include in your bid: footing/pad prep, framing lumber and fasteners, plumbing parts and labor for the tee-in and drain, roofing materials, and the slat screening. Photos of similar outdoor shower or cabana builds would help me pick a contractor faster.
I need a forged railing for the staircase in my house and a matching small railing for the porch: a sketch drawn for this house, restrained plant motifs, a comfortable handrail, pa…
Handmade ceramic tableware line for a 20-seat coffee shop
We are opening a twenty-seat coffee shop and looking for a studio: forty cups in two volumes with saucers, thirty dessert plates and large serving platters — one line, one calm sat…
120 plywood gift boxes: cutting, engraved lid, fitted tray
A run of 120 plywood boxes about 30x20x10 cm for corporate gift sets: hinged or sliding lid, engraved logo, a tray fitted to three items, quiet oil or stain finish and a latch.
Other / Miscellaneous20.09.20260234
0responses
Good to know
How do I respond to this project?
Log in as a freelancer, describe how you will solve the task, name your price and deadline. The client reads responses and starts a dialogue with the best ones.
Who can see my response?
Only the client who posted the project and you. Other freelancers do not see your text or price.