Project description
Every swing starts with a conversation about how you actually plan to use it — quiet porch mornings, evening reading, or a spot sturdy enough for two adults and a couple of kids piled on together. From there I build a solid wood bench seat and back, typically in cedar, white oak, or pressure-treated pine depending on your climate and budget, joined with mortise-and-tenon or reinforced pocket-screw construction, glued with exterior-grade adhesive and assembled with stainless steel hardware throughout.
If your porch ceiling or beam cannot safely carry the load, I build a freestanding A-frame stand sized to the swing, cross-braced at the base and shoulders for stability, and rated to comfortably hold well over 450 pounds — enough for two to three adults at once. Porch-mounted swings instead hang from galvanized eye bolts anchored directly into ceiling joists, never just the finish board, using heavy-duty coated chain or marine-grade rope, with swivel hooks at the top so the swing turns freely and the suspension never twists itself tight over time.
Every component is sanded through several grits by hand, then finished with an exterior-rated stain and marine spar varnish, or a penetrating outdoor oil depending on the species — this is what actually keeps the wood from graying, cupping, and cracking under sun and rain rather than just looking good on day one. On request I can match the stain tone to your existing porch trim, railings, or deck boards so the swing reads as built-in rather than added on.
Typical builds run 8 to 15 days from a confirmed design and measurements to delivery and installation. That includes on-site hanging or A-frame assembly, torque-checking every bolt and chain link, and a final load test with the swing loaded and rocked before I hand it over to you.
If your porch ceiling or beam cannot safely carry the load, I build a freestanding A-frame stand sized to the swing, cross-braced at the base and shoulders for stability, and rated to comfortably hold well over 450 pounds — enough for two to three adults at once. Porch-mounted swings instead hang from galvanized eye bolts anchored directly into ceiling joists, never just the finish board, using heavy-duty coated chain or marine-grade rope, with swivel hooks at the top so the swing turns freely and the suspension never twists itself tight over time.
Every component is sanded through several grits by hand, then finished with an exterior-rated stain and marine spar varnish, or a penetrating outdoor oil depending on the species — this is what actually keeps the wood from graying, cupping, and cracking under sun and rain rather than just looking good on day one. On request I can match the stain tone to your existing porch trim, railings, or deck boards so the swing reads as built-in rather than added on.
Typical builds run 8 to 15 days from a confirmed design and measurements to delivery and installation. That includes on-site hanging or A-frame assembly, torque-checking every bolt and chain link, and a final load test with the swing loaded and rocked before I hand it over to you.
Other / Miscellaneous Cash, Bank transfer
