24FreelanceFreelance marketplace that never sleeps
Response period is over

Retaining Wall Construction for Sloped Backyard

95 views 0 responses#43600
Budget€725for the project
FormatOne-time projectno prepayment
PaymentCash, Bank transfer
Responses acceptedResponse period is overuntil 23.09.2026
Responses0category average: 1.3
Views959 in 14 days

Project description

My backyard has a noticeable slope along the rear property line, and every heavy rain washes soil down toward the fence, leaving bare patches and a small gully near the corner. I want to fix this properly, not with another round of mulch that gets carried away by the next storm. I am looking for a mason or landscaper with real retaining wall experience to design and build a structural wall that holds the slope back for good and gives me a flat, usable terrace above it.

The section that needs support runs roughly 28 to 32 feet along the back of the yard, with a height that varies from about 2 feet at one end to close to 4 feet at the other. I am open to either interlocking concrete block (segmental retaining wall units) or natural stone — whichever you think will hold up best for this height and soil type and fit the budget. I do care about how it looks, since the wall will be visible from the patio, so a clean, even coursing and a color that works with a light gray house are important to me.

Beyond just stacking blocks, I need the job done to code: proper excavation, a compacted gravel base, geogrid reinforcement at the taller sections if the engineering calls for it, and drainage — perforated pipe behind the wall tied into gravel backfill so water does not build up and push the wall out over time. I have seen a neighbor's wall bulge and eventually fail because nobody put in drainage, and I do not want to repeat that mistake. If the height requires a permit or an engineer's stamp in this area, please factor that into your estimate and process, and let me know what you need from me to get it approved.

I would like the finished top of the wall to be level enough to eventually set a small paver patio and a couple of raised garden beds behind it, so precision on the top course matters. A simple cap block finish is fine, nothing fancy, but it should look intentional and be safe to walk near without an edge crumbling.

Please include in your quote or message: your experience with retaining walls of similar height, whether you handle permitting/engineering or subcontract it, your material recommendation with rough pricing, an estimated timeline from start to finish, and photos of at least two or three comparable projects you have completed. Liability insurance and any relevant local licensing are required — please confirm you carry both. I can share yard photos and rough measurements once we connect, and I am flexible on start date within the next month or so, though I would prefer the work finish before the rainy season picks up.
Other / Miscellaneous Cash, Bank transfer

SafeDeal Escrow Protection

Payora SafeDeal Astrina Shield Verified

Funds are locked in Payora USDT (TRC-20) escrow and released to the freelancer only after delivery approval.

24
Twenty · tip

How to write a response that gets picked

  • Open with the client’s task, not with a story about yourself.
  • Link one or two similar works from your portfolio.
  • Name a price and a deadline — and what exactly they include.
  • Ask one clarifying question: it starts the conversation.

Responses 0

Response texts are visible only to the client.

Same category

Similar projects

All projects in the category
Forged railing for a house staircase and a porch

Forged railing for a house staircase and a porch

I need a forged railing for the staircase in my house and a matching small railing for the porch: a sketch drawn for this house, restrained plant motifs, a comfortable handrail, pa…

Other / Miscellaneous23.09.20260236
0responses
Handmade ceramic tableware line for a 20-seat coffee shop

Handmade ceramic tableware line for a 20-seat coffee shop

We are opening a twenty-seat coffee shop and looking for a studio: forty cups in two volumes with saucers, thirty dessert plates and large serving platters — one line, one calm sat…

Other / Miscellaneous20.09.20260244
0responses
120 plywood gift boxes: cutting, engraved lid, fitted tray

120 plywood gift boxes: cutting, engraved lid, fitted tray

A run of 120 plywood boxes about 30x20x10 cm for corporate gift sets: hinged or sliding lid, engraved logo, a tray fitted to three items, quiet oil or stain finish and a latch.

Other / Miscellaneous20.09.20260234
0responses
Good to know
How do I respond to this project?

Log in as a freelancer, describe how you will solve the task, name your price and deadline. The client reads responses and starts a dialogue with the best ones.

Who can see my response?

Only the client who posted the project and you. Other freelancers do not see your text or price.

Where can I find similar work?

New projects in “Other / Miscellaneous” appear every day. All projects in the category

What this page answers