24FreelanceFreelance marketplace that never sleeps
Response period is over

Install a Whole-House Water Filtration System

104 views 0 responses#43571
Budget€925for the project
FormatOne-time projectno prepayment
PaymentCash, Bank transfer
Responses acceptedResponse period is overuntil 19.09.2026
Responses0category average: 1.3
Views1048 in 14 days

Project description

We recently had our tap water tested and the results showed elevated chlorine taste and odor, visible sediment, and some organic contaminants that we would like removed before the water reaches any fixture in the house. I am looking for an experienced plumber or water treatment technician to supply and install a complete whole-house water filtration system at the main water line, right after the meter, so that every tap, shower, and appliance in the home receives filtered water.

The scope of work should include: installing a sediment pre-filter to catch dirt, rust, and particulate matter; a carbon filtration stage to remove chlorine, chloramine, and improve taste and odor; and a UV purification stage to neutralize bacteria and other microorganisms. Please note this is specifically a FILTRATION system for removing contaminants, chlorine, and sediment — this is NOT a water softener project (softeners target hardness minerals like calcium and magnesium and use a different resin-based technology). We do not need softening at this time, only filtration and purification.

The house has a 3/4 inch main supply line in the basement/utility area with reasonably easy access, and there is a 120V outlet nearby for the UV lamp unit. We would like the installer to assess whether a bypass valve is needed for maintenance, ensure proper shut-off valves are installed before and after the system, and check water pressure before and after installation to confirm it is not significantly reduced.

Requirements for the freelancer: valid plumbing license/certification, experience specifically with multi-stage filtration and UV systems (not just softeners), ability to recommend suitable equipment brands and micron ratings for our water quality, and willingness to explain the maintenance schedule (filter cartridge replacement intervals, UV bulb replacement) once installed. Please include in your proposal: your relevant experience, equipment brand recommendations with rough cost breakdown, estimated labor time, and warranty terms on your installation work.

Budget is flexible depending on equipment quality recommended, but please provide a clear itemized quote separating equipment cost from labor. We would like the work completed within the next couple of weeks and are happy to schedule around your availability. Please also confirm you can pull any required local plumbing permits if applicable in our area, and that you carry liability insurance. Photos of previous similar installations are appreciated but not mandatory.
Other / Miscellaneous Cash, Bank transfer

SafeDeal Escrow Protection

Payora SafeDeal Astrina Shield Verified

Funds are locked in Payora USDT (TRC-20) escrow and released to the freelancer only after delivery approval.

24
Twenty · tip

How to write a response that gets picked

  • Open with the client’s task, not with a story about yourself.
  • Link one or two similar works from your portfolio.
  • Name a price and a deadline — and what exactly they include.
  • Ask one clarifying question: it starts the conversation.

Responses 0

Response texts are visible only to the client.

Same category

Similar projects

All projects in the category
Forged railing for a house staircase and a porch

Forged railing for a house staircase and a porch

I need a forged railing for the staircase in my house and a matching small railing for the porch: a sketch drawn for this house, restrained plant motifs, a comfortable handrail, pa…

Other / Miscellaneous23.09.20260236
0responses
Handmade ceramic tableware line for a 20-seat coffee shop

Handmade ceramic tableware line for a 20-seat coffee shop

We are opening a twenty-seat coffee shop and looking for a studio: forty cups in two volumes with saucers, thirty dessert plates and large serving platters — one line, one calm sat…

Other / Miscellaneous20.09.20260245
0responses
120 plywood gift boxes: cutting, engraved lid, fitted tray

120 plywood gift boxes: cutting, engraved lid, fitted tray

A run of 120 plywood boxes about 30x20x10 cm for corporate gift sets: hinged or sliding lid, engraved logo, a tray fitted to three items, quiet oil or stain finish and a latch.

Other / Miscellaneous20.09.20260234
0responses
Good to know
How do I respond to this project?

Log in as a freelancer, describe how you will solve the task, name your price and deadline. The client reads responses and starts a dialogue with the best ones.

Who can see my response?

Only the client who posted the project and you. Other freelancers do not see your text or price.

Where can I find similar work?

New projects in “Other / Miscellaneous” appear every day. All projects in the category

What this page answers