Descrição do projeto
I need a PPR section for the loader. Please rate -
You got it? The deadline is short – this Friday it is desirable to have something already
show. Over the weekend, adjust/repair.
Facility summary:
Building - "Energy Center" in Moscow (inside there is an installation working on the
gas that produces heat.
It has 8 generator stations (such as a large barrel with a large one).
engine). Above each "barrel" is now located near the wall.
The ventilator takes air from the street, cools this engine.
They are now changing the old fans to new ones.
The problem is, the old ones were put in when there were no engines.
i.e. The building was empty. We need to put new vents on the
Older seats and fixed (seats will be installed)
Adjusted to place - brewed or installed a new
jersey/two-taurus.
I suggest you bring new installations through the wall - disassemble
several sandwich panels and windows. If it's a passing decision
(Say it yourself) it should be described beautifully and
competently. No need to write all installations - one on the outside
The wall, and one on the second wall.
The RRP is needed to agree with the owner of the building replacement option
Fan (work order) We need to do the section itself.
The forklift offered the building owner:
Telescope loader JLG 4013PS
No need to draw in ACAD - we will hand over on paper.
If any data is missing, specify conditionally ("measure" before the
The location of the installation.
You got it? The deadline is short – this Friday it is desirable to have something already
show. Over the weekend, adjust/repair.
Facility summary:
Building - "Energy Center" in Moscow (inside there is an installation working on the
gas that produces heat.
It has 8 generator stations (such as a large barrel with a large one).
engine). Above each "barrel" is now located near the wall.
The ventilator takes air from the street, cools this engine.
They are now changing the old fans to new ones.
The problem is, the old ones were put in when there were no engines.
i.e. The building was empty. We need to put new vents on the
Older seats and fixed (seats will be installed)
Adjusted to place - brewed or installed a new
jersey/two-taurus.
I suggest you bring new installations through the wall - disassemble
several sandwich panels and windows. If it's a passing decision
(Say it yourself) it should be described beautifully and
competently. No need to write all installations - one on the outside
The wall, and one on the second wall.
The RRP is needed to agree with the owner of the building replacement option
Fan (work order) We need to do the section itself.
The forklift offered the building owner:
Telescope loader JLG 4013PS
No need to draw in ACAD - we will hand over on paper.
If any data is missing, specify conditionally ("measure" before the
The location of the installation.
Outros / Diversos Dinheiro, Transferência bancária, Dinheiro eletrônico
