Upgrade the device to ATmega8
Employer
[no-member:pro]Mikhail[/no-member:pro]
Project parameters
Type of cooperationPeriodic employment
SectionEngineering. Drawings
Prepaymentwithout prepayment
Payment methodsBank transfer, Electronic money
Acceptance of requestsfrom Mar 1, 2019 until Mar 8, 2019
Project description
3 improvements to be made. The device is in the proteus.
1. Add shunt 75SHSM 300A 0.5.
2, add the DIP switch to two buttons. So you can choose when to measure the voltage on the battery 125A or 175A. The second button tells you what the voltage is in percent.
On 100%-57.6 volts; 10%-48 volts; 0-36 volts
Off 100%-79.2 volts; 10%-66 volts; 0% 49.5 volts
3. It is necessary that when applying to the voltage controller, that he after 3 seconds gave a signal to close the relay. And kept it on all the time.
1. Add shunt 75SHSM 300A 0.5.
2, add the DIP switch to two buttons. So you can choose when to measure the voltage on the battery 125A or 175A. The second button tells you what the voltage is in percent.
On 100%-57.6 volts; 10%-48 volts; 0-36 volts
Off 100%-79.2 volts; 10%-66 volts; 0% 49.5 volts
3. It is necessary that when applying to the voltage controller, that he after 3 seconds gave a signal to close the relay. And kept it on all the time.
