Projektbeschreibung
It takes tantamaresque.
1.
Description: A flat model of a yacht on magnets showing key details of a yacht for children. All details (sails, keel, body, etc.) are separate from each other and are attached to the base on magnets, eventually creating a solid image.
1). The yacht is sporty. Stylized drawing from a photo.
2). Image angle: the side of the yacht should be slightly at an angle so that the “bottom” is visible, approximately as in the photo at the link (strict adherence to proportions and perspective is not necessary, it is important that key details of the yacht are visible)
3). The final image will be “shallable”, all the large details of the yacht (diagram at the link) will eventually be separate from each other, but must be collected into one single integral image.
Yacht details:
1.) The hull
2). nose
3.) Feed
4.) Staxel (it has the logo ILoveYachting)
5.) Grote
6.) Mast
7.) Gic.
8.) Stack (tire detail, no need to draw)
9.) Genaker
10.) Keel.
11.) Steering wheel
12.) Rubber
13.) Bushprit
14.) The image is bright, stylized, indetailed, understandable to children.
2.
1. Yacht sports: photo hr, drawn under the "cartoon"
2. The image should be inscribed in a rectangle of 1.5x2 m.
3. In the yacht "plant" 4 characters (it can be painted animals or people), "team" of the yacht, the link is an example.
4. On the sail logo IloveRusYachting (send)
5.The hashtag #russiansailingleague is displayed on the image (it is important that the font is clearly readable)
6. Provide "windows" for the heads on each of the figures. “Window” is an oval of 14x19 cm (the slope depends on the pose of the character, but should be oriented in face and convenient for the person being photographed). The lower level of the "window" is at least 80 cm from the lower edge of the image, the upper level is not higher than 150 cm.
7. The brightest colors possible
8. Real proportions are not required.
9. There should be no small details along the contour - the image will be cut out.
3.
1.Drawn wave image (example at link =)
2. The average height of the wave is not more than 50 cm (height can vary within one wave, at the edges of m). B. Above), not more than a metre long.
3. 2 pieces, should fit on one common canvas with a dolphin (below), then will be cut along the contour.
4.
1. Drawn dolphin jumping out of the water (example at link =)
2. The height of the dolphin is not more than 1.5 meters
3. You can add an element like a ball on the nose (in this case, the ball should have a logo and, if possible, a hashtag)
4. Dolphin to place on one canvas with waves, the total size of the canvas 1.5x2 m
Hyrez yachts there, dolphin, waves and so on – you can take from the drains and refine, from scratch to draw nothing.
1.
Description: A flat model of a yacht on magnets showing key details of a yacht for children. All details (sails, keel, body, etc.) are separate from each other and are attached to the base on magnets, eventually creating a solid image.
1). The yacht is sporty. Stylized drawing from a photo.
2). Image angle: the side of the yacht should be slightly at an angle so that the “bottom” is visible, approximately as in the photo at the link (strict adherence to proportions and perspective is not necessary, it is important that key details of the yacht are visible)
3). The final image will be “shallable”, all the large details of the yacht (diagram at the link) will eventually be separate from each other, but must be collected into one single integral image.
Yacht details:
1.) The hull
2). nose
3.) Feed
4.) Staxel (it has the logo ILoveYachting)
5.) Grote
6.) Mast
7.) Gic.
8.) Stack (tire detail, no need to draw)
9.) Genaker
10.) Keel.
11.) Steering wheel
12.) Rubber
13.) Bushprit
14.) The image is bright, stylized, indetailed, understandable to children.
2.
1. Yacht sports: photo hr, drawn under the "cartoon"
2. The image should be inscribed in a rectangle of 1.5x2 m.
3. In the yacht "plant" 4 characters (it can be painted animals or people), "team" of the yacht, the link is an example.
4. On the sail logo IloveRusYachting (send)
5.The hashtag #russiansailingleague is displayed on the image (it is important that the font is clearly readable)
6. Provide "windows" for the heads on each of the figures. “Window” is an oval of 14x19 cm (the slope depends on the pose of the character, but should be oriented in face and convenient for the person being photographed). The lower level of the "window" is at least 80 cm from the lower edge of the image, the upper level is not higher than 150 cm.
7. The brightest colors possible
8. Real proportions are not required.
9. There should be no small details along the contour - the image will be cut out.
3.
1.Drawn wave image (example at link =)
2. The average height of the wave is not more than 50 cm (height can vary within one wave, at the edges of m). B. Above), not more than a metre long.
3. 2 pieces, should fit on one common canvas with a dolphin (below), then will be cut along the contour.
4.
1. Drawn dolphin jumping out of the water (example at link =)
2. The height of the dolphin is not more than 1.5 meters
3. You can add an element like a ball on the nose (in this case, the ball should have a logo and, if possible, a hashtag)
4. Dolphin to place on one canvas with waves, the total size of the canvas 1.5x2 m
Hyrez yachts there, dolphin, waves and so on – you can take from the drains and refine, from scratch to draw nothing.
