3D modeling

We are interested in hiring a designer to process our 3D scans and bring them to 3D printing readiness. Collect the scans into one (the fact is that the body is scanned normally, and the head in the same scan looks bad, so we scan the head (or face) and sometimes the bust separately, and you need to attach this head and bust instead of a poorly scanned head and bust to a full-body scan, so that you eventually get a printable file similar to a real person). It is also necessary, of course, to remove all irregularities, to iron out holes, etc. The approximate working time, which we have already announced with experience designers, 1.5-2 hours per figure. We are going to open a printing service, so if your price and quality of execution suits us, we can offer constant demand. Supported scanner formats: STL, OBJ, PLY, 3DS. According to the figures: there will be three types for now - a whole figure, a bust and a figure of a hero with the face or head of the right person (i.e., a figure of a whole, a bust and a figure of a hero with the face or head of the right person). We deal not only with processing, but also with sculpting and building a figure from scratch, so please say separately whether you do this or not and what are the approximate prices. According to the figures, you will need both colored figures - in their case with a cavity, and non-colored - in STL format without cavities for printing with a 3d printer on plastic, colored ones must be made hollow with a wall thickness of at least 2.5 mm. In addition, you need to make a hole from the bottom, under the stand, for the exit of the powder from the inside with a diameter of 5-6 mm.