Designing ARM
Employer
[no-member:pro]Konstantin[/no-member:pro]
Project parameters
Type of cooperationOne-time project
SectionSoftware development
Prepaymentwithout prepayment
Payment methodsCash
Acceptance of requestsfrom Feb 9, 2022 until Feb 16, 2022
Project description
Programmer services are required. You need to perform a task related to programming the ARM and 8051 processor.
The task: to create a program for the control system, which reads real-time data from the IMU sensors (accelometergiroscope) and two control microphones.
Architecture: the leading ARM controller controls up to 100 8051 pieces, each of which is connected to two IMU sensors, communication is an IIC bus
The system should start and stop at the signal of the control device (laptop), record the sensor readings in the file. In parallel, a sound file is written from two control microphones. At the end of the test, transmit to the control device.
Preferably a programmer from Kharkov, as the "iron" is located in Kharkov.
Order deadline is February 7, 2020.
The task: to create a program for the control system, which reads real-time data from the IMU sensors (accelometergiroscope) and two control microphones.
Architecture: the leading ARM controller controls up to 100 8051 pieces, each of which is connected to two IMU sensors, communication is an IIC bus
The system should start and stop at the signal of the control device (laptop), record the sensor readings in the file. In parallel, a sound file is written from two control microphones. At the end of the test, transmit to the control device.
Preferably a programmer from Kharkov, as the "iron" is located in Kharkov.
Order deadline is February 7, 2020.
