Auto-watering system
Employer
[no-member:pro]Mikhail[/no-member:pro]
Project parameters
Type of cooperationOne-time project
SectionSoftware development
Prepaymentwithout prepayment
Payment methodsBank transfer, Electronic money
Acceptance of requestsfrom Aug 18, 2021 until Aug 25, 2021
Project description
We need to refine the existing sketch.
1. Remove the servo drive control
2 add watering control using gsm gprs sim 800 module
3. Control via SMS team
Status - information about the irrigation zone and temperature
On (zone number) (time in mines) - inclusion of the specified zone at the specified time
Off (zone number) - deactivate the specified zone
Off-off-off-off all zones.
Also you need to implement a "smooth transition of watering" i.e. the transition from one zone to another zone should occur as follows: 1 on 2 off, 1 on 2 on, 1 off 2 on. This is to avoid a water shock. Only 1 zone can operate. It's 4 zones. Each zone is 1 exit on the relay. Correspondingly, the relay is off-water. Of the sensors, only rtc, temperature and humidity and a rain sensor are used. All sensors are like a project. Version used 1.3.3
1. Remove the servo drive control
2 add watering control using gsm gprs sim 800 module
3. Control via SMS team
Status - information about the irrigation zone and temperature
On (zone number) (time in mines) - inclusion of the specified zone at the specified time
Off (zone number) - deactivate the specified zone
Off-off-off-off all zones.
Also you need to implement a "smooth transition of watering" i.e. the transition from one zone to another zone should occur as follows: 1 on 2 off, 1 on 2 on, 1 off 2 on. This is to avoid a water shock. Only 1 zone can operate. It's 4 zones. Each zone is 1 exit on the relay. Correspondingly, the relay is off-water. Of the sensors, only rtc, temperature and humidity and a rain sensor are used. All sensors are like a project. Version used 1.3.3
