Microprocessor flashing
Employer
[no-member:pro]Anton[/no-member:pro]Anton
Project parameters
Type of cooperationOne-time project
SectionSoftware development
Prepaymentwithout prepayment
Payment methodsBank transfer, Electronic money
Acceptance of requestsclosed
Project description
The scientific project requires a microwave emitter with a controlled frequency of operation.
For these purposes, a conventional microwave oven is suitable, but it is necessary to change the firmware of the microprocessor so that it is possible to adjust the frequency of the magnetron operation.
The required range is 0.5sec to 5min in increments of 0.5sec. (If 600 steps are too many, we will reduce the requirements)
You also need to turn off the timer because Working hours should not be limited.
The budget for the purchase of a suitable microwave oven is limited to 6000p. Microwave is chosen by the performer, according to their needs (ie with the desired m / processor, unlocked firmware, etc.).
If the performer lives outside the Stavropol Territory, then you will have to organize the transfer (ready emitter). For this reason, performers from the European part of Russia are considered.
For these purposes, a conventional microwave oven is suitable, but it is necessary to change the firmware of the microprocessor so that it is possible to adjust the frequency of the magnetron operation.
The required range is 0.5sec to 5min in increments of 0.5sec. (If 600 steps are too many, we will reduce the requirements)
You also need to turn off the timer because Working hours should not be limited.
The budget for the purchase of a suitable microwave oven is limited to 6000p. Microwave is chosen by the performer, according to their needs (ie with the desired m / processor, unlocked firmware, etc.).
If the performer lives outside the Stavropol Territory, then you will have to organize the transfer (ready emitter). For this reason, performers from the European part of Russia are considered.
