1
Элла
no recommendations
no complaints
Project title: Do a simple task in Sketchup
Type of cooperation: One-time project
Section: Education and consulting
Prepayment: prepayment is possible
Payment methods: Bank transfer
Acceptance of requests: from 2023-02-20 until 2023-02-25
Type of cooperation: One-time project
Section: Education and consulting
Prepayment: prepayment is possible
Payment methods: Bank transfer
Acceptance of requests: from 2023-02-20 until 2023-02-25
Project description:
Remote work for a Sketchup specialist. I have 4 things I can’t do that I can’t do. Since these are student works, perfect execution is not required.
TK from the teacher:
1) draw a model of a two-room apartment with a kitchen and bathroom (furnishing the premises is not necessary, but the presence of furniture from imported ready-made models of furniture will be considered as a positive property of the model being delivered); on adjacent walls should be placed windows on more than 3, on lesser - 2. Windows D.B. They are at the same distance from each other and at an equal distance from each other. All windows DB. The same and represent blank stained glass without internal binding, only with a window frame, which should be external and internal side stand out beyond the wall, and from the inside also be equipped with a window sill. The window shall also consist of two glass panes of typical window glass thickness (4, 6 or 8 mm). Of course, the windows should be transparent. All the doors are in the living room, d.b. The same and open relative to the jamb by 30 degrees, These should be paneled doors in which the paneled frame is taken with blank inserts of the same material as the panels. Fills of the bivalve door in the living room should be taken from the middle to the top with glass, one leaf d.b. It's 30 degrees open. All interior doors d.b. They are equipped with round handles on both sides. Another door - the entrance - steel, with two pressing rotary handles on both sides, with a peephole at the eye level of an adult, is also ajar similar to the others. Door hinges do not need to model, but correctly orient and position the doors relative to the joint is mandatory. The proportions of thicknesses and heights of walls should, in general, correspond to domestic housing. The only difference is that the thicknesses of all walls can be the same (but if you make the carriers thicker, this will only be a plus). There is no need to make the ceiling. All windows and doors, as well as individual pieces of furniture (if you still arrange objects in the apartment) Components for series and groups for single items.
(2) Draw a pseudo-antique column, the barrel of which is a straight cylinder with non-through trough-shaped cannelures, and the capital and base of the column correspond to the appearance of the capital and the base of the Doric column. The proportions of the column should leave a sense of harmonic proportionality to its total constituent elements, as well as the height of the column to its thickness and size and number of cannelurs.
(3) Draw a composition of a cross-plane and a complex trajectory that extends along all three axes of space and begins and ends with sections that represent an arc, and then form from the cross-section by means of a trajectory a figure of the following (a) from the beginning of the trajectory to the end, (b) in a copy from the middle of the initial section of the trajectory to the middle of the final section of the trajectory. Within the framework of the same task, also create a set of three-dimensional geometric primitives, including a torus and a ball with equatorial latitudes, a torus and a ball without equators, a cone, a pill, which is a cylinder with two hemispheric tops of the same diameter, a pipe of the same height as the pill, with rounded edges, which is a pipe of external and internal diameters of which are equal to the corresponding diameters of the torus, and end rounds are one and a half cut equatorially. Within the framework of the same task, an object with a non-through cavity (upset) must be present, which is the result of eliminating the area of intersection of some initial objects from one of them, and the intersecting source, and also copies of the original objects should be located away from the result obtained. In the simplest case, these will be two cylinders crossed at an angle of 90 degrees with the entry of one into the other by half the thickness of the cylinder.
(4) Draw a red wine glass, a white wine glass, a martini fouger, a whiskey glass. If the glass for whiskey will be an approximation to the cube and have rounded corners on the edges of the walls and bottom, and look like a whiskey glass, an additional point will be added to the work. Of course, all the dishes D.B. Transparent.
Remote work for a Sketchup specialist. I have 4 things I can’t do that I can’t do. Since these are student works, perfect execution is not required.
TK from the teacher:
1) draw a model of a two-room apartment with a kitchen and bathroom (furnishing the premises is not necessary, but the presence of furniture from imported ready-made models of furniture will be considered as a positive property of the model being delivered); on adjacent walls should be placed windows on more than 3, on lesser - 2. Windows D.B. They are at the same distance from each other and at an equal distance from each other. All windows DB. The same and represent blank stained glass without internal binding, only with a window frame, which should be external and internal side stand out beyond the wall, and from the inside also be equipped with a window sill. The window shall also consist of two glass panes of typical window glass thickness (4, 6 or 8 mm). Of course, the windows should be transparent. All the doors are in the living room, d.b. The same and open relative to the jamb by 30 degrees, These should be paneled doors in which the paneled frame is taken with blank inserts of the same material as the panels. Fills of the bivalve door in the living room should be taken from the middle to the top with glass, one leaf d.b. It's 30 degrees open. All interior doors d.b. They are equipped with round handles on both sides. Another door - the entrance - steel, with two pressing rotary handles on both sides, with a peephole at the eye level of an adult, is also ajar similar to the others. Door hinges do not need to model, but correctly orient and position the doors relative to the joint is mandatory. The proportions of thicknesses and heights of walls should, in general, correspond to domestic housing. The only difference is that the thicknesses of all walls can be the same (but if you make the carriers thicker, this will only be a plus). There is no need to make the ceiling. All windows and doors, as well as individual pieces of furniture (if you still arrange objects in the apartment) Components for series and groups for single items.
(2) Draw a pseudo-antique column, the barrel of which is a straight cylinder with non-through trough-shaped cannelures, and the capital and base of the column correspond to the appearance of the capital and the base of the Doric column. The proportions of the column should leave a sense of harmonic proportionality to its total constituent elements, as well as the height of the column to its thickness and size and number of cannelurs.
(3) Draw a composition of a cross-plane and a complex trajectory that extends along all three axes of space and begins and ends with sections that represent an arc, and then form from the cross-section by means of a trajectory a figure of the following (a) from the beginning of the trajectory to the end, (b) in a copy from the middle of the initial section of the trajectory to the middle of the final section of the trajectory. Within the framework of the same task, also create a set of three-dimensional geometric primitives, including a torus and a ball with equatorial latitudes, a torus and a ball without equators, a cone, a pill, which is a cylinder with two hemispheric tops of the same diameter, a pipe of the same height as the pill, with rounded edges, which is a pipe of external and internal diameters of which are equal to the corresponding diameters of the torus, and end rounds are one and a half cut equatorially. Within the framework of the same task, an object with a non-through cavity (upset) must be present, which is the result of eliminating the area of intersection of some initial objects from one of them, and the intersecting source, and also copies of the original objects should be located away from the result obtained. In the simplest case, these will be two cylinders crossed at an angle of 90 degrees with the entry of one into the other by half the thickness of the cylinder.
(4) Draw a red wine glass, a white wine glass, a martini fouger, a whiskey glass. If the glass for whiskey will be an approximation to the cube and have rounded corners on the edges of the walls and bottom, and look like a whiskey glass, an additional point will be added to the work. Of course, all the dishes D.B. Transparent.
